StonePro Traverfill - Travertine Repair - Fills Smalls pits, Holes & voids in Travertine & Limestone (Light 3 lb)

I bought travertine tables at an outlet store. A chunk chipped off the base when I was moving it. I superglued the chunk back on (don’t recommend that but it’s holding). I used the travertine to fill in some other cracks and holes in the table. It looks great now and you can barely see where the chip was. I like that you mix it to the consistency that works for the size of the repair.

Easy to use on cracked/chipped travertine only issue is with the color....to light but it will darken with time.

This was easy to mix, easy to spread, easy to clean. My one dislike is it does not dry to a uniform color everywhere it is used, from the same batch. The deeper the crevice, the closer it dries to the light tan color, however, if it's a very shallow spot that just needs a bit of a skim, it dries chalky white. It was weird how different colors came from the same batch mixed. I would not trust this on a solid color but the tile I have is a mix of creams, tans, a few darker gray areas so this worked well and blended well. Just not perfect/uniform coloration so have to give a 4 star rating.

great product

This Traverfill made filling travertine pits as easy as filling nail holes with spackling. The light color works well on my travertine. It is costly but I saw no alternative that costs less. I used a cut-up credit card to apply it to small pits and holes, as a substitute for a plastic putty knife that worked very well. I also used it to stir water into the dry powder, and this was easy.

This material comes as a colored powder and is easy to mix by adding water. It does NOT harden in 10-15 as advertised, but has a working period closer to 45 minutes. It’s fine for patching pin holes, but be prepared to go over twice on any blemishes larger than a dime due to shrinkage. Two coats took care of holes as large as a quarter.

I wasn't sure how this would work, but I must say I'm impressed. It filled the holes in our travertine and cleaned up really well. This was a simple product to use and as mentioned, really easy to clean up. Once it sets, the excess scrapes off cleanly and can be vacuumed up or wiped with a sponge. I sprayed sealer on top to help protect it and so far, no one can tell where I had holes in the travertine floor. Nice job Traverfill!

Nowhere on the description does it say you can’t apply a sealer. Well, travertine should be sealed for longevity. All the holes I filled now are white, whereas everything else looks great. Will be pressure washing this out and apply a grout instead. Garbage product!!!

Fantastic product. Easy to use and quick to dry.

This was very easy to use and made a huge difference in the look of our travertine. It fills in those little holes that you can’t possibly clean.

Have used epoxy type fillers with success in my travertine floor, this looked a much easier fix- which it is, but doesn’t last long, filler soon comes out of the holes

Gotta walk on eggshells when using this stuff because it does not stay in. It is also easily soiled. Perhaps I'm doing incorrectly ?I followed ALL instructions on my second bottle purchase.