How wide is the door? It looks to be larger than 1/2 the width but I’d rather know for sure.

It is about 1/2. That made it easier to get stuff in it. I put alot of stuff inside including a metal shelf. I still have room to move inside. Best choice i made

Thre are no predrilled holes on the shed, US 3 side, what do we need to do? It is the top support bar.

I spent quite a while figuring this out. The grooves on the wider face of the US3 pieces need to face the outside of the shed and the groove on the narrow face of the part faces up. This isn't clear in the manual. The screws that attach the top of the wall panels go into the groove in US3 and the screws to secure the roof panels go in the groove on top of US3. The screws will cut their way into those grooves pretty easily. For those screws I set my cordless drill (Porter Cable 20V) to seven on the torque clutch. For screws into sheet metal I used a setting of three. Don't do final tightening until all screws for a panel are in place and piece is aligned. I also drilled out the holes for the hinge screws into the shed to 1/8". The holes in the doors were okay.

I bought the 4x6 one, a single box arrived without instructions and without screws, should it be like this?

Of coarse it shouldn't. I would either contact the company directly to see if they would send u some ,if u don't wanna go threw the hassle of sending the whole box back through Amazon. I got instructions and a box of screws and hardware.

Product Dimensions	86.87 x 161.54 x 180.34 cm; 30.71 kg
Part number	DVPS10
Material type	Electro-galvanized Steel, Alloy Steel
Power source type	no
Manufacturer	Devoko
Item model number	DVPS10
ASIN	B09X59ZCBG

Devoko

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة