CIVIVI Titanium Pocket Clip with 6PCS Titanium screws T001D (Black)

Le quedó muy bien a mi navaja

This pocket clip is an improvement over the stock clips that come with Civivi knives. It looks better, and when it fits, it makes the knife feel better in the hand when I grip it and allows the knife to be carried more comfortably for me. I highly recommend it! The ODD 22, probably my favorite Civivi model to date, is listed as a compatible model for this pocket clip, and I can confirm from experience that this clip can be successfully installed onto it. I used screw pack B to mount the clip to this model as one of the stock clip screws was too short to secure the clip onto the knife. Although it isn't listed as a compatible model, I was able to mount this clip securely on my Civivi ExOne. I used the 2 shortest screws of the 6 that are included with the clip. The shortest screw (4.7mm from screw pack B) went to the hole nearest the butt end of the handle, and the second shortest screw (any of the 5.4mm screws from screw pack A or C) went into the other hole. The second shortest screw does stick out of the liner a tiny bit, but not enough to be in danger of contacting the blade. I did try to mount the clip with the ExOne's stock screws, but they were too short to hold the clip securely on the knife. Another unlisted Civivi model that this clip can be installed on is the Bluetick. One of the stock screws from the Bluetick was too short to really mount the clip securely, but screw pack A worked perfectly for me. I did install this clip securely onto a Civivi Synergy liner lock using screw pack B, but I wouldn't say that the fit was optimal with this model of knife. The recess cut into the handle scale for the stock clip is deep enough that it causes this milled titanium clip to sit tilted on the handle scale when installed. The tilting isn't extreme enough to cause a hot spot for me when gripping the knife, but I do think some users won't like the look or feel of how it fits. I also was able to securely install this clip onto a Civivi Crabby using its stock clip screws, but this clip is a similarly less-than-optimal fit on the Crabby like on the Synergy, for the same reason. I have other Civivi knives and will add them to this review if I get a chance to try this clip on those as well. For non-Civivi knives, I was able to securely install this clip onto a Kansept Kryo liner lock. For this model, I used the Kryo's stock screws to mount the clip. I was also able to install this clip onto a Kizer T1 liner lock using that knife's stock clip screws. I successfully installed this clip onto a CJRB Feldspar liner lock using the 4.7mm screw and one of the 5.4mm screws. One of the stock screws of the Feldspar was too short. The Shan Zu Peafowl liner lock is another example of a folder you can put this clip on using the stock clip screws of the knife. However, this clip fits the more curved handle of the Peafowl poorly. The tip of the clip ends up significantly off-center in the handle of the knife, and it created a hot spot for me when gripping the knife to use. This clip can be installed on an Artisan Arion liner lock, but you will have to either get screws of the proper length or cut them yourself from the screws provided with the clip. The stock clip screws from the knife are too short, and all of the screws included with this clip are too long. As a matter of fact, I accidentally caused my Arion handle to warp a bit trying to tighten screws that were too long, so hopefully others reading this review can avoid the same mistake. The Kershaw Bel Air is another knife that you can install this clip on if you can get the right screws for it. One of the original clip screws to the Bel Air is too short to install this clip with, and the screws that are included with the Civivi clip are too thick to fit the Bel Air. I was unable to install this clip onto a full-sized Kizer Sheepdog liner lock. The holes for the clip screws on that knife are too far apart to fit this clip on. I was also unable to install this clip onto any of several Protech models that I own, including the TR-3 manual action, the Mordax, the Oligarch, the Cambria, and the Godfather. The holes for the clip screws on these knives are also too far apart to fit this clip.

Great clip, makes the knife feel more premium as a whole. The extra hardware to accommodate different models is awesome as well. This fits most models but not all so do your research before buying. Civivi always hits home runs

Great add on for your Civivi Knife. Fits perfect, extremely easy to install and looks amazing. This clip has a lower profile so it feels tighter and better attached to jeans as opposed the original that protrudes quite a bit. Smooth finish and round corners all around make it that it doesn’t catch on walls, doors etc. Finish is as expected with titanium and I assume the titanium will be much more durable than the original. Fantastic value, as well as better function make this a must have for me.

I purchased the Civivi Chevalier and really didn’t like how the deep carry clip created a “hot spot” when gripping the knife. My preference is usually deep carry clips, but I have this same pocket clip on my Kizer Yokie, and really liked it. The specs were the same and this was a perfect fit! The low profile of this clip is fantastic. The tension is perfect and it still sits plenty deep in my pocket. Obviously it might be different for a different knife. But the quality and finish are great. It also comes with severs screws options for different knives. This clip should work with several WE, Civivi, Sencut, and even some Kizer knives. As of right now, I would definitely recommend this! I will see if my opinion changes over time.