Prime-Line MP10066 Corner Shield with Tape, 3/4 In. x 3/4 In., Plastic Construction (5 Pack)

This was a good solution for covering a large and uneven gap between an old sink cabinet and the two walls that abuted it. Adhesion is fairly poor so I removed the double sided tape and used bathroom caulk to mount it. Looks very nice. Don't know how long it will hold up. The double sided tape would probably work okay for a clean, aand perfectly square mounting situation.

These are used to save our corners in the basement from kids playing. They look great and were easy to put on. Many reviews mentioned the adhesion is garbage, so I was prepared with loctite. I added a bit of that to each side and the used painters tape to hold the corner guard in place overnight. I've not had any issues with it since!

Pros: They look good and are easy to cut to different lengths is you need to. Cons: The adhesive is not very good and doesn't still well to painted surfaces. Overall: Not a bad product but if you plan on they sticking for a good long time you will need to use some type of construction adhesive.

My pantries have pressed-board shelves, and the edges are exposed. I never got around to painting them. These corner covers are normally used to protect the edges of walls, particularly wallboard, painted surfaces, etc. But these also work well to cover the bare edge of a shelf. They provide a quick and easy finish. The adhesive is on both inside surfaces, so you get a lot of 'stick' to hold it in place.

I used these to cap off some vinyl siding. I pulled off the cover for the tape and there was little to no adhesion. I touched the tape and it had less glue on it than scotch tape, so I ended up using some glue to hold it in place.

This was really easy to install and the tape holds the corner nice and even with the wall. I haven’t tried to remove but I would imagine the paint needing a little touch up but it’s worth the risk of damaging the drywall. We have white trim around the house so the white blends nicely! We will see how it holds up! I have two dogs that cut the corners tight when running to the front door!

The interior angle of the shields appeared to be too extreme for the weak adhesive to withstand (ie, 80 degree angles versus 85-90 degrees). I suppose the combination of these two factors contributed to early failures (lasted about 3-6 hrs then fell off the walls on their own).

We have new white cabinets and the edge of bottom shelves we’re starting to get marked up from taking things in and out. These are so easy to put on. Took 40 minutes to measure, cut and apply on bottom shelf. Well worth it.

Tiene una altura ideal para evitar que se desgasten las esquinas de las paredes, además que se ven muy bien y son discretas. Es muy fácil de instalar, tiene dos cintas adhesivas en cada lado en todo lo largo, en mi caso las paredes eran lisas (sin textura).

Great sleek corner protection.

These plastic corners cut easily to desired length. Our application was to protect the MDF baseboards in high traffic areas in our home. Seem to be working very well. Adhesion has been good so far.

These came out of the box slightly bent such that they aren't a perfect 90 degree angle throughout the length. You kinda have to to open them up as you stick them on to make sure you get good contact with the adhesive tape. Otherwise they're a nice product and a good size. The narrower size looks nice in homes and less commercial than the other options available from amazon. A bead of caulk down the sides helps to finish the install and make it look really clean

Very easy to install--take the backing off the tape and press onto the corners! right size for what I needed. The only downsize was that the tape was a bit too narrow, but so far they are sticking to the corners! I would buy these again.