MOTU828mk3 Hybrid Firewire Audio Interface

828mk3 Hybrid Firewire Audio Interface. As a hybrid audio interface, the 828mk3 provides flexible connectivity to any Mac or PC via FireWire or high-speed USB 2.0, with 10 channels of pristine 192kHz analog and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU audio interfaces or the 8pre mic input expander. Tons of I/O The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs. On-board digital mixer with effects for monitoring and live mixing Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer-with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ, and reverb to every input and output, independent of your host computer. When from the mic/guitar inputs, the 828mk3's signal overload protection gives you an extra 12dB of headroom above zero with no digital clipping or harsh artifacts. Advanced audio analysis tools Analyze and your audio with advanced diagnostic tools, including a full-screen realtime FFT display, spectrogram waterfall display, full-featured oscillo, X-Y plot, and linear/polar phase analysis graphs. Standalone operation as a mixer After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a Standalone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD. Across-the-board compatibility The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software an...

• CueMix FX: Flexible 28 input/16 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ,.
• 28 inputs/30 outputs (at 44.1/48 kHz): No channel sharing.
• Mic inputs, S/PDIF I/O, headphone out, and main outs are all handled as separate channels.
• Front-panel control gives you access to any setting in your entire 828mk3 mix directly from the front panel.
• Standalone operation: Program your mixes at the studio and then bring the 828mk3 to your gig without your computer.